APC Easy UPS Single Phase BV Series is a versatile UPS developed to handle inconsistent power conditions while also delivering the quality millions of IT professionals trust around the world.
| BV1000I-MSX | |
|---|---|
| Output Voltage | 230 V |
| Input Voltage | 230 V |
| Battery type | Lead-acid battery |
| Battery Life | 3-5 year(s) |
| Weight | 5.7 kg |
| Warranty | 2 years repair or replace |
| Action | Get a Quote Shop Now |
Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.
Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high power devices.
Corrects voltage dips and surges to safe levels which is especially important for regions with poor power. This also saves battery life by correcting sustained voltage fluctuations without losing battery power.
Protects your valuable electronic devices against damaging lightning, surges and spikes.
Keyhole sockets for mounting the UPS in structured wiring closets, behind desks, in basements, and garages.
Efficiency : View Efficiency Graph
The main purpose of the Power-Saving Back-UPS (Uninterrupted Power Supply) product range is to provide emergency power to a load when the input power source fails. Additionally, the unit provides control and management of individual outlets allowing for user initiated operating modes that reduce the power consumed by the equipment attached to the UPS.
The functional unit is the protection of up to 330 W of load against input power failure for 5 years and provide a backup time of 5 minutes in case of a power outage.
This product range includes Power-Saving Back-UPS with different capacities, protecting between 185 W to 865 W, and different form factors, tower and surge protector, styles. While not specific to any kind of equipment, the Power-saving Back-UPS are typically used to retain power integrity of household computer equipment. The outlet management capabilities of the Power-Saving Back-UPS have been optimized for this environment. The product range includes products with the following model numbers:
The representative product used for the analysis is the BE550G Power-Saving Back-UPS product (550 VA / 330 W). The UPS configuration is Single UPS with bypass and the UPS performance classification is VFD SY 333 pursuant to the UPS Configuration and Classification System described in IEC 62040-3:2011. The product dimensions are 8.8 cm high x 18 cm wide x 30.2 cm deep. The Input Dependency Characteristics of the reference product is VFD and monomode; its power factor is 0.9 and there is no redundancy.
| Main Input Voltage: | 230 V |
| Main Output Voltage: | 230 V |
| Rated power in W: | 600 W |
| Rated power in VA: | 1000 VA |
| Product or component type: | Uninterruptible power supply (UPS) |
| Input Connection Type: | BS1363A British |
| output connection type: | 4 universal receptacle |
| Cable length: | 1.50 m |
| Number of cables: | 1 |
| Battery type: | Lead-acid battery |
| Height: | 9.25 cm |
| Width: | 16.05 cm |
| Depth: | 30.5 cm |
| Net weight: | 5.7 kg |
| Mounting preference: | No preference |
| Mounting mode: | Not rack-mountable |
| Network frequency: | 50/60 Hz +/- 5 Hz auto-sensing |
| Input voltage limits: | 170...280 V |
| Maximum configurable power in W: | 600 W |
| Output frequency: | 50/60 Hz +/- 1 Hz unsynchronised |
| UPS type: | Line interactive |
| Wave type: | Stepped approximation to a sinewave |
| Graph display: | 1 |
| Maximum configurable power in VA: | 1000 VA |
| Transfer time: | 6 ms typical : 10 ms maximum |
| Alarm: | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Warranty: | 2 years repair or replace |