Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
| APC BX750MI | |
|---|---|
| Capacity (VA) | 750VA |
| Power Rating (Watts) | 410 Watts |
| UPS Topology | Line Interactive |
| Battery type | Lead-acid battery |
| Input Voltage | 140 – 300V |
| Output Voltage | 230 V |
| Warranty | 2 years repair or replace |
| Action | Get a Quote Shop Now |
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels. This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut. The Back-UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
To install PowerChute Personal Edition (PCPE) software, connect a USB cable to the data port on the UPS and the other end to a computer with access to the web. On the computer, go to www.apc.com/tools/download. Select “Software Upgrades - PowerChute Personal Edition” in the “Filter by Software/Firmware” drop down menu. Select the appropriate operating system. Follow directions to download the software.
The Back-UPS is able to temporarily mute user correctable audible alarms such as On Battery. During such audible alarms, a short press of the POWER button will temporarily mute the audible alarm until the condition has been reset. A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS. Other critical events such as Battery replacement and Charger notification can not be temporarily muted. The unit in these cases must be turned off.
| Network frequency | 50/60 Hz +/- 5 Hz auto-sensing |
| Plug standard | IEC 60320 C14 |
| Input voltage limits | 140 to 300 V |
| Input voltage | 230 V |
| Rated power in Watt | 410 W |
| Maximum configurable power in Watt | 410 W |
| Output frequency | 50/60 Hz +/- 1 Hz sync to mains |
| UPS type Standby | Wave type Stepped approximation to a sinewave |
| Nb of power socket outlets | 4 IEC 60320 C13 |
| Output voltage | 230 V |
| Ambient air temperature for operation | 0 to 40 °C |
| Relative humidity | 0 to 95 % non-condensing |
| Operating altitude | 0 to 3000 ft |
| Ambient air temperature for storage | -15 to 40°C |
| Storage altitude | 0.00 to 914.40 M |
| Acoustic level | 40 dBA |
| Battery type | Lead-acid battery |
| Battery recharge time | 8 H |
| Control panel | LED Status display with on line : on battery |
| Alarm | Alarm when on battery : distinctive low battery alarm |
| Cable length | 1.22 M |
| Dimension (H x W x D) | 16 x 12 x 35.5 cm |
| Net weight | 5.4 Kg |
| Warranty | 2 years repair or replace |
