Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Run Time : | View Runtime Graph |
Efficiency : | View Efficiency Graph |
APC Back-UPS 750VA Tower 230V - BX750MI | APC Smart-UPS 750VA 230V - SMT750IC | |
Output capacity | 410 Watts / 750VA | 500 Watts / 750 VA |
Battery | 14 W | 49 W |
Battery type | Lead-acid battery | Lead-acid battery |
Battery Life | 3 - 5 Years | 3 - 5 Years |
Topology | Line interactive | Line interactive |
Dimensions | 160 x 120 x 355 mm | 161 x 138 x 369 mm |
Weight | 5.4 kg | 11.8 Kg |
Warranty | 2 years repair or replace | 3 years repair or replace (excluding battery) and 2 years for battery |
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels. This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut. The Back-UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
To install PowerChute Personal Edition (PCPE) software, connect a USB cable to the data port on the UPS and the other end to a computer with access to the web. On the computer, go to www.apc.com/tools/download. Select “Software Upgrades - PowerChute Personal Edition” in the “Filter by Software/Firmware” drop down menu. Select the appropriate operating system. Follow directions to download the software.
The Back-UPS is able to temporarily mute user correctable audible alarms such as On Battery. During such audible alarms, a short press of the POWER button will temporarily mute the audible alarm until the condition has been reset. A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS. Other critical events such as Battery replacement and Charger notification can not be temporarily muted. The unit in these cases must be turned off.