SMT3000I – APC Smart-UPS 3000VA LCD 230V in Dubai, UAE – Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

SMT3000I - APC Smart-UPS 3000VA LCD 230V

Award-winning Smart-UPS protects critical data by supplying reliable, network-grade power in either traditional tower or rack-optimized convertible form factor. Included PowerChute management software provides IT administrators the comfort of safe system shutdown and advanced UPS management.

SMT2200I - APC Smart-UPS 2200VA LCD 230V



Cold-start capable: Provides temporary battery power when the utility power is out.

Energy meter: Provides actual kilowatt hours of usage for energy conscious users.

Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency: Reduces utility costs, generates less heat.

Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.

Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

SmartSlot: Customize UPS capabilities with management cards.

StruxureWare Data Center Expert compatible: Enables centralized management via StruxureWare Data Center Expert.

Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.


Smart-UPS Features & Benefits


Marketing Features


Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data safe and available: Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems.

Save time with easy and convenient remote accessibility: Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.

Smarter productivity  with ability to tailor to your specific application needs: Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.

Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management: Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.




Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.




Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification: Warns when a battery is not available to provide backup power.

Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.




Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.




User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers: Enables a quick recovery from overload events.

Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.




Serial connectivity: Provides management of the UPS via a serial port.

LED status indicators: Quickly understand unit and power status with visual indicators.

Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Network manageable: Provides remote power management of the UPS over the network.

Disconnected battery notification: Warns when a battery is not available to provide backup power.

USB connectivity: Provides management of the UPS via a USB port (not available on all models).





Output power capacity: 2.7kWatts / 3.0kVA

Max Configurable Power (Watts): 2.7kWatts / 3.0kVA

Nominal Output Voltage: 230V

Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage

Output Voltage Distortion: Less than 5% at full load

Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal

Topology: Line Interactive

Waveform type: Sine wave

Output Connections:

  • (8) IEC 320 C13 (Battery Backup)
  • (2) IEC Jumpers (Battery Backup)
  • (1) IEC 320 C19 (Battery Backup)

Transfer Time: 2ms typical




Nominal Input Voltage: 230V

Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)

Input Connections: IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A

Input voltage range for main operations: 160 – 286V

Input voltage adjustable range for mains operation: 151 – 302V

Number of Power Cords: 1

Other Input Voltages: 220, 240


Batteries & Runtime


Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time: 3hour(s)

Replacement Battery: RBC55

Expected Battery Life (years): 3 – 5

RBC Quantity: 1

Extendable Run Time: 1


Efficiency: View Efficiency Graph


Communications & Management


Interface Port(s): SmartSlot, USB

Control panel: Multi-function LCD status and control console

Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

Emergency Power Off (EPO): Yes

Available SmartSlot™ Interface Quantity: 1


Surge Protection and Filtering


Surge energy rating: 365Joules

Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449




Maximum Height: 435MM, 43.5CM

Maximum Width: 197MM, 19.7CM

Maximum Depth: 544MM, 54.4CM

Net Weight: 52.5KG

Shipping weight: 63.7KG

Shipping Height: 699MM, 69.9CM

Shipping Width: 381MM, 38.1CM

Shipping Depth: 762MM, 76.2CM

Color: Black

Units per Pallet: 9.0




Operating Temperature: 0 – 40 °C

Operating Relative Humidity: 0 – 95 %

Operating Elevation: 0-3000meters

Storage Temperature: -15 – 45 °C

Storage Relative Humidity: 0 – 95 %

Storage Elevation: 0-15000meters

Audible noise at 1 meter from surface of unit: 53.0dBA

Online thermal dissipation: 375.0BTU/hr




Approvals: CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE

Standard warranty: 3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available.


Sustainable Offer Status


RoHS: Compliant


PEP: Available in Documentation tab

EOLI: Available in Documentation tab

Other Environmental Compliance: China RoHS