SRT8KRMXLI – APC Smart-UPS SRT 8000VA RM 230V in Dubai, UAE – High density, double-conversion on-line power protection with scalable runtime.



10/100 BaseT Connection: Connect the device to a network using a 10 or 100 BaseT connection.

Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.






Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.

Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.

Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable: Provides temporary battery power when the utility power is out.

Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.




Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Scalable runtime: Allows additional run time to be quickly added as needed.

Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.


Marketing Features


Avoids costly power problems by keeping your IT equipment and data protected and available.: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Low operating and maintenance costs with proven reliability and intelligent battery management.: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Save time with easy and convenient remote/network accessibility.: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.




Network manageable: Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.

SmartSlot: Customize UPS capabilities with management cards.

LED status indicators: Quickly understand unit and power status with visual indicators.

Serial connectivity: Provides management of the UPS via a serial port.




Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.




User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Disconnected battery notification: Warns when a battery is not available to provide backup power.

Audible alarms: Provides notification of changing utility power and UPS power conditions.

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.





Output power capacity: 8.0kWatts / 8.0kVA

Max Configurable Power (Watts): 8.0kWatts / 8.0kVA

Nominal Output Voltage: 230V

Output Voltage Distortion: Less than 2%

Output Frequency (sync to mains): 50/60Hz +/- 3 Hz

Other Output Voltages: 220, 240

Load Crest Factor: 3 : 1

Topology: Double Conversion Online

Waveform type: Sine wave

Output Connections:

  • (4) IEC 320 C19 (Battery Backup)
  • (6) IEC 320 C13 (Battery Backup)
  • (1) Hard Wire 3-wire (H N + G) (Battery Backup)
  • (3) IEC Jumpers (Battery Backup)

Bypass: Internal Bypass (Automatic and Manual)




Nominal Input Voltage: 230V, 400V 3PH

Input frequency: 40 – 70 Hz (auto sensing)

Input Connections: Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)

Input voltage range for main operations: 160 – 275V

Input voltage adjustable range for mains operation: 100 – 275 (half load), 173 – 476 (half load)V

Other Input Voltages: 220, 240, 380, 415


Batteries & Runtime


Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time: 1.5hour(s)

Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)

Replacement Battery: APCRBC140

Expected Battery Life (years): 3 – 5

RBC Quantity: 2

Extendable Run Time: 1

Extended Run Options: APC-Smart-UPS-SRT-8000VA-RM-230V


Efficiency: View Efficiency Graph


Communications & Management


Interface Port(s): RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB

Control panel: Multi-function LCD status and control console

Audible Alarm: Audible and visible alarms prioritized by severity

Emergency Power Off (EPO): Yes

Available SmartSlot™ Interface Quantity: 1


Surge Protection and Filtering


Surge energy rating: 480Joules




Maximum Height: 263MM, 26.3CM

Maximum Width: 432MM, 43.2CM

Maximum Depth: 715MM, 71.5CM

Rack Height: 6U

Net Weight: 111.82KG

Shipping weight: 130.0KG

Shipping Height: 461MM, 46.1CM

Shipping Width: 600MM, 60.0CM

Shipping Depth: 1000MM, 100.0CM

Color: Black

Units per Pallet: 1.0




Operating Temperature: 0 – 40 °C

Operating Relative Humidity: 0 – 95 (non-condensing) %

Operating Elevation: 0-3000meters

Storage Temperature: -15 – 45 °C

Storage Relative Humidity: 0 – 95 (non-condensing) %

Storage Elevation: 0-15000meters

Audible noise at 1 meter from surface of unit: 55.0dBA

Online thermal dissipation: 1497.0BTU/hr

Protection Class: IP 20




Approvals: CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE

Standard warranty: 3 years repair or replace (excluding battery) and 2 years for battery


Sustainable Offer Status


RoHS: Compliant


Battery Directive: Compliant