HPE OC 1920S 24G PPoE+ 370W Switch in Dubai, UAE – Support flexible installation options, including mounting on wall, under table, or on desktop.

HPE OC 1920S 24G PPoE+ 370W Switch (JL385A)

• Layer 3 static routing with 32 routes for network segmentation and expansion
• Access control lists for granular security control
• Customized operation using intuitive Web interface
• Spanning Tree Protocol: STP, RSTP, and MSTP
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 2 SFP 100/1000 Mbps ports
• Up to 370 W PoE+ to power IoT, APs and cameras
• Power Supply Included
• 1U – Height
• Limited Lifetime warranty

HPE_OC_1920S_24G_PPoE+_370W_Switch_

SPECIFICATIONS

I/O ports and slots

  1. 24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX:half or full; 1000BASE-T: full only
  2. 2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)

Physical characteristics

  1. Dimensions: 17.42(w) x 12.7(d) x 1.73(h) in (44.25 x 32.26 x 4.39 cm) (1U height)
  2. Weight: 9.7 lb (4.4 kg)

Memory and processor

  1. ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB

Performance

  1. 100 Mb Latency < 7.0 μs
  2. 1000 Mb Latency < 2.0 μs
  3. Throughput 77.3 Mpps
  4. Routing/Switching capacity 52 Gbps
  5. Routing table size 32 entries
  6. MAC address table size 16,000 entries

Reliability: MTBF (years) 57.1
Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 15% to 95% @ 104°F (40°C)
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 15% to 95% @ 140°F (60°C)
Altitude: up to 10,000 ft (3 km)
Acoustic: Power: 45 dB
Frequency: 50/60 Hz
AC voltage: 100 – 127 / 200 – 240 VAC
Current: 3.5/1.9 A
Maximum power rating: 435 W
Idle power: 34.2 W
PoE power: 370 W PoE+
Generic: EN 55024, CISPR 24
EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3