The HPE MSA 2062 Storage is a flash-ready hybrid storage system designed to deliver hands-free, affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. It gives you the combination of simplicity, flexibility, and advanced features you may not expect in an entry-priced array. Start small and scale as needed with any combination of solid state drives (SSDs), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. With the ability to deliver 325,000 IOPS, the new MSA 2060 is up to 45% faster than its prior generation with ample horsepower for even the most demanding workloads
Looking for seriously simple and affordable flash storage?
The HPE MSA 2062 Storage is a flash-enabled system designed for affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. The HPE MSA 2062 gives you the combination of simplicity, flexibility and advanced features you many not expect in an entry-priced storage array. Starting with 3.84 TB of embedded flash capacity, you can scale the system from there with any combination of solid state disks (SSD), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. Capable of delivering in excess of 325,000 IOPS, the HPE MSA 2062 saves you up to 32% with an all-inclusive software suite and 3.84 TB of flash capacity included. It’s seriously simple and affordable flash storage to help you achieve high performance yet meet challenging budgets.
Rear View
| 1. | Power Switch | 2. | Redundant Power and Cooling Module (AC or DC) |
| 3. | Host connection ports (16Gb FC, 10GbE iSCSI or 12Gb SAS depending on model) | 4. | Ethernet management port |
| 5. | 12Gb SAS expansion port | 6. | Controller A (Inverted) |
| 7. | Controller B |
What’s New
• New 6th Gen MSA storage architecture with new HW and SW features including Tiering 2.0, RAID protection scheme (MSA DP+), a new web interface, and data management through a new RESTful interface.
• Improved array performance that provides more IOPS, more bandwidth and expanded backend connectivity.
• Up to 45% increase [1] on IOPS, and up to 60% improvement on sequential throughput vs MSA Gen5 (depending on host protocol).
• New disk group type (MSA DP+) that increases availability, dramatically decreases RAID rebuild times, improves performance, simplifies setup and provides more granular expansion of disk pools.
• New 18 TB capacity 7.2K LFF SAS hard drive, single drive and six-pack options, available for MSA 2060 LFF array and MSA 2060 LFF expansion drive enclosure.
• The HPE MSA 2062 Storage is capable of delivering over 325,000 IOPS for affordable application acceleration for small to medium-sized businesses.
• Save 32% on HPE MSA 2062 with all-inclusive software and 3.84 TB of Solid State Drive (SSD) capacity included.
• The HPE MSA 2062 Storage is easy to install, easy to use, easy to maintain, even for an IT generalist. Administrators will find the MSA 2062’s new Storage Management Utility intuitive and easy to navigate.
• HPE MSA’s automated tiering engine dynamically responds to workload changes so you don’t have to, insuring the hottest data will be moved to the fastest media automatically and in real-time.
• The HPE MSA 2062 Storage delivers virtualized snapshot technology making data protection and instant recovery a snap.
• Remote replication via Fibre Channel (FC) or iSCSI facilitates affordable disaster recovery solution.
• Encrypted SSDs and HDDs with local key management can be deployed to deliver a secure, encrypted hybrid flash array.
• The HPE MSA 2062 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF 2060 expansion drive enclosures for a maximum of 9 enclosures (10 in total including the array).
• Start small and scale as needed with any combination of SSDs, Enterprise SAS or MidLine SAS HDDs.
