SRT192BP - APC Smart-UPS SRT 192V 5kVA and 6kVA Battery Pack
Rack-Mount Installation
1 : Secure two brackets to the XLBP. Use four screws in each bracket.
2 : Install two cage nuts.
3 : Rest the XLBP on the rail shelves. Slide the XLBP into the rack.
4 : Secure the XLBP to the rack. Use two screws in each bracket.
5 : Install four battery modules.
6 : Connect four battery modules.
7 : Reinstall the battery compartment doors. Tighten the thumbscrews to secure the doors.
8 : UPS models SRT5K or SRT6K with one XLBP Install one XLBP bezel and one UPS bezel.
Connect Ground and Battery Cables
Connect ground cables
Availability
- Multiple battery pack configuration: Connect up to 10 battery packs for extended runtime applications.
- Advanced battery management included: Embedded monitoring at the cell, module, and cabinet level provides a clear picture of battery runtime and health, with the added benefits of predictable, consistent runtime performance and stable cell health.
| Battery Type : | Lead-Acid battery |
| Provided Equipment : | Documentation CD Installation guide Warranty card |
| Color : | Black |
| Height : | 17.01 in (43.2 cm) |
| Width : | 5.12 in (13 cm) |
| Ambient air temperature for operation : | 32…104 °F (0…40 °C) |
| Operating altitude : | 0...10000 ft |
| Storage altitude : | 0…15000 ft (0.00…4572.00 m) |
| Battery Slots Empty : | 0 |
| Included Battery Modules : | 0 |
| Battery Voltage : | 192V |
| Warranty : | 2 years repair or replace |
