APC Smart-UPS 1500VA Tower LCD 230V (SMC1500IC )
Batteries & Runtime
Run Time : | View Runtime Graph |
Efficiency : | View Efficiency Graph |
Front View :
1. | Display | 2. | Bezel |
3. | Battery | 4. | Internal battery connector |
Rear View :
1. | APC™ SmartConnect port | 2. | Serial port |
3. | USB port | 4. | Chassis ground screw |
5. | Smart Slot | 6. | Output circuit breaker/overload protection |
7. | Controlled outlet group | 8. | Outlets |
9. | UPS input | 10. | Battery connector (located on the front panel of rack-mount models) |
11. | Input circuit breaker |
Manageability
- USB connectivity: Provides management of the UPS via a USB port (not available on all models).
- Serial connectivity: Provides management of the UPS via a serial port.
- Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
- LED status indicators: Quickly understand unit and power status with visual indicators.
- Audible alarms: Provides notification of changing utility power and UPS conditions.
Availability
- Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
- Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
- Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Resettable circuit breakers: Enables a quick recovery from overload events.
- Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Safety
- Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Adaptability
- Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation
- Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Output Power Capacity : | 1000 Watts / 1500 VA |
Max Configurable Power (Watts) : | 1000 Watts / 1500 VA |
Nominal Output Voltage : | 230V |
Output Voltage Distortion : | Less than 5% |
Output Frequency (sync to mains) : | |
Other Output Voltages : | 220, 240V |
Topology : | Line Interactive |
Waveform Type : | Sine wave |
Output Connections : | IEC Jumpers (Battery Backup) |
Nominal Input Voltage : | 230V |
Input Frequency : | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections : | IEC-320 C14 |
Input voltage range for main operations : | 160 to 286 V |
Input voltage adjustable range for mains operation : | 151 to 302V |
Other Input Voltages : | 220 |
Battery Type : | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time : | 3 hour(s) |
Replacement Battery : | RBC7 |
RBC Quantity : | 1 |
Interface Port(s) : | USB |
Control panel : | Multi-function LCD status and control console |
Audible Alarm : | Alarm when on battery : distinctive low battery alarm : configurable delays |
Surge energy rating : | 459 Joules |
Filtering : | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Dimension : | 219 x 171 x 439 mm (H x W x D) |
Net Weight : | 24.09 kg |
Operating Environment : | 0 to 40 °C |
Operating Relative Humidity : | 0 to 95% |
Operating Elevation : | 0 to 3000 meters |
Storage Temperature : | -15 to 45°C |
Storage Relative Humidity : | 0 to 95% |
Storage Elevation : | 0 to 15000 meters |
Audible noise at 1 meter from surface of unit : | 45.000 dB |
Online Thermal Dissipation : | 135.000 BTU/hr |
Standard warranty : | 3 years repair or replace (excluding battery) and 2 year for battery |