Aruba AP-365 (RW) in Dubai, UAE – Multi-functional 360 Series 802.11ac Wave 2 outdoor access points deliver cost-effective wireless connectivity to mobile and IoT devices in a wide range of outdoor and warehouse environments.

Aruba AP-365 (RW) 802.11n/ac Dual 2x2:2 Radio Integrated Omni Antenna Outdoor AP (JX966A)

• Access Point – deploy with or without controller
• 2.4-GHz (400 Mbps max) and 5-GHz (866 Mbps max) radios, each with 2×2 MIMO and integrated omni- directional antennas
• Aruba 360 Series APs running InstantOS
• Secure enterprise mesh
• Hybrid WLAN AP and air monitor
• Antennas -Supports 802.11ac TxBF which provides an effectively infinite variety of antenna patterns
• AP type: outdoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n
• 2×2 MIMO with two spatial streams and up to 1,266 Mbps wireless data rate
• One 10/100/1000BASE-T Ethernet network interface (RJ-45)
– Auto-sensing link speed and MDI/MDX
– 802.3az Energy Efficient Ethernet (EEE)
• The AP supports direct DC power and Power over Ethernet (PoE)

Aruba AP-365 (RW)

SPECIFICATIONS

AP-360 SERIES SPECIFICATION

• AP-365
– 2.4-GHz (300 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2×2 MIMO and integrated omni- directional antennas.
• AP-367
– 2.4-GHz (300 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2×2 MIMO and integrated directional antennas.

WIRELESS RADIO SPECIFICATIONS

• AP type: outdoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n
• 2×2 MIMO with two spatial streams and up to 1,266 Mbps wireless data rate
• Supported frequency bands (country-specific restrictions apply):
– 2.4000 GHz to 2.4835 GHz
– 5.150 GHz to 5.250 GHz
– 5.250 GHz to 5.350 GHz
– 5.470 GHz to 5.725 GHz
– 5.725 GHz to 5.875 GHz
• Available channels: Dependent upon configured regulatory domain
• Dynamic Frequency Selection (DFS) compliant to radar coexistence requirements
• Supported radio technologies:
– 802.11b: Direct-sequence spread-spectrum (DSSS)
– 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
– 802.11n/ac: 2×2 MU-MIMO with up to two spatial streams
• Supported modulation types:
– 802.11b: BPSK, QPSK, CCK
– 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
– 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum (conducted aggregate) transmit power (limited by local regulatory requirements):
– 2.4-GHz band: +26 dBm (23 dBm per chain)
– 5-GHz bands: +25 dBm (22 dBm per chain)
• Maximum EIRP (limited by local regulatory requirements):
– 2.4 GHz band
> 365 28.7 dBm EIRP
> 367 32.3 dBm EIRP
– 5 GHz Band
> 365 29.3 dBm EIRP
> 367 31.5 dBm EIRP
• Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems
• Maximum ratio combining (MRC) for improved receiver performance
• Cyclic delay diversity (CDD) for improved downlink RF performance
• Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
• Space-time block coding (STBC) for increased range and improved reception
• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
• Transmit beam-forming (TxBF) for increased reliability in signal delivery
• 802.11ac wave 2 MU-MIMO
• Supported data rates (Mbps):
– 802.11b: 1, 2, 5.5, 11
– 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
– 802.11n: 6.5 to 300 (MCS0 to MCS15)
– 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support: VHT 20/40/80
• 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power
• Maximum power consumption: 12.5 watts
• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source

ANTENNAS

Supports 802.11ac TxBF which provides an effectively infinite variety of antenna patterns
• AP-365: Integrated Omni antennas (H and V polarized)
– 2.7 dBi @ 2.4 GHz
– 4.3 dBi @ 5.x GHz
• AP-367: Integrated Directional antennas (+/-45 polarized)
– 6.3 dBi @ 2.4 GHz (90° Vertical x 90° Horizontal)
– 6.5 dBi @ 5.x GHz (90° Vertical x 100° Horizontal)

OTHER INTERFACES

• One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
– Auto-sensing link speed and MDI/MDX
– 802.3az Energy Efficient Ethernet (EEE)
– PoE-PD: 802.3af PoE
• Serial console interface (micro USB)
• Reset button
• Visual indicator (LED):
– Power/system status

MOUNTING

• Ordered separately
• Optional mounting kits:
– AP-270-MNT-V1: Outdoor AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner
– AP-270-MNT-V2: Outdoor AP short mount kit for pole/wall mounting
– AP-270-MNT-H1: Outdoor AP mount kit for hanging from inclined/horizontal structures
– AP-270-MNT-H2: Outdoor AP flush mount kit for hanging from inclined/horizontal structures

MECHANICAL

• Dimensions/weight (unit, excluding mount accessories):
– 165mm (W) x 165mm (D) x 110mm (H), 6.5” (W) x 6.5” (D) 4.3” (H)
– 807g/1.78lbs (AP-365)
– 815g/1.80lbs (AP-367)
• Dimensions/weight (shipping):
– 198mm (W) x 200mm (D) x 128mm (H), 7.8” (W) x 7.9” (D) x5.0” (H)
– 1,115g/2.46lbs (AP-365)
– 1,123g/2.48lbs (AP-367)

ENVIRONMENTAL

• Operating:
– Temperature: -40° C to +55° C (-40° F to +131°F) ambient in full sun
– Humidity: 5% to 95% non-condensing
• Max Elevation 3000m
• Storage and transportation:
– Temperature: -40° C to +70° C (-40° F to +158°F)
– EN 300 019 Storage and Transportation
• Shock, vibration, and earthquake
– IEC 60068-2-64/-27/-6
• Weather resistance
– Wind Survivability: Up to 165 mph
– IP66/67
– ASTM B117-07A: Salt spray testing per UL50 NEMA 4x
– EN 300 019 Environmental testing
» Non-weather protected locations
» Full solar exposure

REGULATORY/COMPLIANCE

• FCC/Industry of Canada
• CE Marked
• RED Directive 2014/53/EU
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2
• AP-365:
– EN 50121-1
– EN 50121-3-2
– EN 50121-4
– EN-50155

REGULATORY MODEL NUMBERS

• AP-365: APEX0365
• AP-367: APEX0367